3 Types Of Electronic Storage For IT

Written by Common Computer Problems on January 4th, 2018. Posted in Uncategorized

electronic cabinet

Did you know that projections for 2015 indicated that end users would spend more than $180 billion on cloud services? That level of demand shows a need for as many servers as the industry can handle. In order to provide the capacity of storage required by consumers, server operators need the most advanced and organized system for their servers. To do this, IT professionals use electronic cabinets or racks to vertically stack servers. There are three main electronic cabinet designs that these professionals use.

  1. Open Frame
    This type of electronic cabinet is exactly as described. The racks inside hold servers and the frame holds the racks. There are no doors, however, just exposed server racks held up by a frame. The best use cases for this design are high traffic electronics that require many wires and electronics that don’t require consistent temperatures.
  2. Rack Enclosures
    If your servers need to be kept secure in an enclosure, but you would still like the ability to remove the walls to convert your server rack into a similar design to open frame racks, an enclosure is your best bet. Enclosures can withstand more weight, will still have some room for wires, and can be ordered in a variety of different sizes. Some have ventilation running through the walls to prevent overheating.
  3. Wall Mounts
    Quite aptly, this type of data rack is mounted to the wall. Smaller than the other two due to its mounting point, wall mounted cabinets can support less weight. Since they are smaller, though, you will be able to find a place that they can be used that isn’t in the way. Also, wall mounted racks can be either open frame or enclosed.

When deciding between these three types of electronic cabinet, always keep in mind what you plan to use it for. If your needs are more in line with storing a lightweight durable electronic and you have space to spare, your best bet is probably an open frame rack. On the flip side, if you need to store something heavy while keeping it protected from accidents, an enclosure is probably best. Either way, with the growing cloud storage economy, it is even more imperative to provide secure and organized storage for everyone.

Our Population Will Grow By 50% Over The Next Four Decades What Does This Mean For Healthcare?

Written by Common Computer Problems on December 23rd, 2017. Posted in Geospatial analysis software, Location intelligence market, Location intelligence software

Demographic reporting

Demographic reporting tools are only going to be more needed from here. The world is growing and, as a result, technology is put in a demanding spot to grow even faster. Industries across the globe, from small local businesses to massive corporations, all need to become familiar with marketing analytics if they’re to stay afloat in an increasingly uneven future. Also known as geospatial analysis, these tools provide a much bigger picture of demographic shifts and the influence these changes will have on certain businesses, the economy as a whole and healthcare.

The Importance of Executive Staffing Agencies

Written by Common Computer Problems on December 21st, 2017. Posted in Executive search consultants, Hr executive recruiters, Human resources consultant

Hr executive placement

The Importance of Executive Staffing Agencies

Whether you are a seasoned professional that recruits executive talent on your own or have worked with HR executive search firms in the past, finding the right firm for HR executive placement is crucial to the success of your business.

According to a 2016 Gallup poll, Millennials are the “Job Hopping Generation,” with 6 in 10 open to a new job at any given time, more than any other generation. With HR executive placement and resource staffing, the gray areas in recruiting these individuals becomes a less-stressful process.

When Employees Don’t Work.

MIT Scientists Have Discovered a Cloud of Floating Technological Debris

Written by Common Computer Problems on November 29th, 2017. Posted in Pcb assembly, Pcb board assembly, Pcb manufacturing, Pcb printing service, Pcb prototype service

prototype printed circuit boardsUnfortunately, humans don’t just pollute the air, earth, and oceans. In our short time exploring outer space, we’ve also created a fair amount of space debris, which orbits our planet in a loose web.

According to MIT News, hundreds of millions of pieces of space debris are currently orbiting the earth every single day. From old paint chips to even prototype printed circuit boards, this debris has formed a cloud that moves throughout the atmosphere at approximately 17,500 miles per hour. At such fast speeds, a piece of debris the size of a pebble can destroy a floating spacecraft.

Researchers from Massachusetts Institute of Technology (MIT), along with NASA and the U.S. Department of Defense, have developed a new laser technique that can identify not only the exact location of this other space debris, but its actual contents as well.

The team of researchers are using ground-based telescopes and laser radar machines to track more than 17,000 objects floating in space to help prevent collisions with essential space machines and spacecrafts.

“In space, things just tend to break up over time, and there have been two major collisions over the last 10 years that have caused pretty significant spikes in debris,” said Michael Pasqual, a former graduate student in MIT’s Department of Aeronautics and Astronautics. “If you can figure out what a piece of debris is made of, you can know how heavy it is and how quickly it could deorbit over time or hit something else.”

Researchers believe that prototype printed circuit boards within the cloud of space debris could exhibit unique polarization effects. As far as the construction of prototype printed circuit boards, there are three major types: single-sided, double-sided, and multi-layered. For the multi-layered prototype PCBs, the internal layers are able to be dedicated to power distribution, which decreases the loop area and provides a major boost to Electromagnetic interference (EM), also called radio-frequency interference.

Hopefully, thanks to advanced technology and hardworking researchers, our space programs will be able to prevent future disasters and eventually eradicate this growing cloud of outer space debris. If you want to learn more about the PCB fabrication process, contact PCB Unlimited today!

Does Your Company Rely on Affordable and Reliable PCB Assembly Services?

Written by Common Computer Problems on November 27th, 2017. Posted in Fast pcb prototype, Pcb manufacturing, Prototype assembly

Pcb fabrication process

What are you doing this Cyber Monday?
Chances are you are spending some time online looking for the latest holiday bargains.
On the day that is known for having some of the best online deals of the year, consumers across the country are on their computers and their mobile devices ordering as fast as websites will allow. On a day when technology is connecting consumers to the deals that they most want it should come as no surprise that the technology industry itself is also in full swing. From the printed circuit board assembly services that enable our handheld devices to run to the larger electronic components that we use to watch football games on the weekend, the PCB fabrication process is

Small Batch PCB Assembly Services and Other Advancements Within the Electronic Component Industry

Written by Common Computer Problems on November 17th, 2017. Posted in Pcb board assembly, Pcb manufacturing, Pcb prototype service

Prototype assembly

Printed circuit boards (PCBs) were first introduced around 1945. Fifty years later, this technological innovation became a $7.1 billion industry. In 2000, the industry was worth $10 billion, and attained more than $60 billion worldwide as of 2012. By 2014, however, the combined revenue of PCBs and electronic component manufacturing in the United States was valued at approximately $44 billion. Needless to say, this industry continues to innovate and grow.

In order to create PCBs, designers now use a computer-aided design system, or CAD. This special software enables designers to lay out the board’s circuit pattern in this program rather than by hand. Prior to this software being introduced. designers would use clear Mylar sheets in order to make a transparent photomask of their designs-in0process. It’s

4 Tips for Improving Your Company?s Website and Search Engine Optimization

Written by Common Computer Problems on November 4th, 2017. Posted in Managed it services, Tampa technology companies, Website design tampa

It support

Is your company looking to expand its search engine optimization and IT services? Sometimes it?s easier to use IT outsourcing for this work rather than attempting to do it in house. If your company has employees dedicated to other equally important projects, you should consider researching the top technology companies to help you come up with some effective strategies to make your company even more successful. The right technology companies will offer useful tips, tricks, and advice to fix any problems you?re having and improve your technology altogether.

Interested in learning more about some useful tips and tricks to make your company?s website more successful? Keep reading for more information about user?s preferences when it

7 Services You Need to Look for When Hiring PCB Manufacturing Companies

Written by Common Computer Problems on November 2nd, 2017. Posted in Pcb assembly, Pcb assembly quote, Pcb board assembly, Pcb prototype service, Pcb quotes

pcb manufacturing companiesPrinted circuit board (PCB) production is perhaps one of the most important industrial services provided to tech manufacturers around the world today. There are circuit boards in almost every electronic we use, so it makes sense that it’s a big industry. How big? Well, in 1995, about 50 years after the first PCBs were introduced, the industry was valued at approximately $7.1 billion. By 2012, industry value had skyrocketed to upwards of $60 billion worldwide. Talk about a successful industry.

But the key to maintaining this industry is selecting excellent PCB manufacturing companies who can turn out high-quality, efficiently crafted products for technology companies around the world. Whether you’re the owner of a technology company or you’re looking into getting started in the PCB manufacturing field, there are a few key services that a great PCB manufacturing company should provide.

To give you an idea of what you should be looking for in your search for high-quality PCB manufacturing companies, here are seven key services that we offer to our customers at Advanced Assembly.

  1. Low-Volume PCB Assembly: One of our specialties, this service is essential for PCB prototype assembly orders.
  2. Quick Turn: We offer some of the fastest turn times in the industry.
  3. Turn-Key Services: Our partnerships with some of the top component suppliers take the stress out of searching for parts.
  4. State of the Art Technology: We’re incredibly proud of our cutting-edge technologies, as well as our efforts to stay one step ahead of the industry.
  5. Assembly Check Services: Our Design for Assembly verification software actually checks every order before production begins, minimizing the risk of error.
  6. Box Build: In addition to our many other services, we provide box build and electro-mechanical support.
  7. First Article Services: This is en especially important service, as we can build first-article boards for you to test before your order comes through.

These are just a few of the numerous services we offer, and they’re services that any great PCB manufacturing companies should be offering as well. Printed circuit board assembly services are some of the most important in the world for technology development, and the companies responsible should be held to high standards.

Facts on Low Volume PCB

Written by Common Computer Problems on October 24th, 2017. Posted in Pcb printing service, Pcb prototype service, Pcb quotes

Circuit board assembly services

The first iPhone was released in 2007 and since then the expansion of technology has blown many people away. Understand that in 2014, the revenue of the circuit board and electronic manufacturing industry was estimated to be at about $44 billion in the United States alone. Technology has come along way and as a result, a lot of people are buying into this new world of technology that we live in.

Understand low volume PCB is not easy. First and foremost, you should know that PCB stands for Printed Circuit Board. Also, you should know that the expansion of this industry has brought forth new skilled positions that are paid quite well.
A typical engineer’s salary can range anywhere from $50,000 to $150,000.

A lot of board designers will work with computer-aided design systems that utili

Reasons to Consider Outsourcing Your IT Services and Support

Written by Common Computer Problems on October 2nd, 2017. Posted in Internet marketing tampa, Managed service provider tampa, Tampa it services

Managed it services

Have you ever outsourced work at your company? If you have before, you probably know of the benefits that come with hiring a company to offer their services. If you haven?t yet, there are plenty of reasons why your company could grow, flourish, and succeed even more if you outsourced a department or two. You don?t have to hire employees to be in the office in order to get the job tasks done in an efficient and productive manner. All you have to do is research and hire the best firms to help move your company forward.

Interested in learning more about how to outsource departments at your business like the IT department? Keep reading for more information about IT outsourcing and why it can help improve network security and network support.

Increase in Companies Outsourcing Job Tasks

You m